Universal symbol of an idealised woman Essay Example for Free

Universal symbol of an idealised woman Essay Donne becomes jealous of her bust that surrounds her breasts because not only is it right next to what he desires but also it remains stiff whereas he is beginning to lose his erection: Off with that happy busk, which I envy, that still can be , and still can stand so high. His frustration in the situation is starting to make his self esteem lapse; Donne thinks that the power that women wield is enough to cause you to lose confidence. To Donne she is a natural figure and therefore he begins to compare her to organic subjects, he talks about how she is like a beautiful meadow having been revealed from the hills shadow: Your gown going off, such beauteous state reveals, as when from flowery meads thhills shadow steals. Donne believes that love and women are natural and blossoming and that they should be treated like they are as integrated as trees and hills. Donne also compares his ideal woman to a continent that he is about to explore: O my America my new found land He feels so much for this woman and wants her so badly that he compares to a place that he wishes to rove and discover her body and experience sexual arousal. He sees women as a new and exciting experience and love the reward. Swift never gives his subject such respect and praise as to compare her to a country but instead likes to make fun of this poor woman and at the same time have a go at the religious activities at the time: But never from religious Clubs whose favour is she sure to find. Here he suggests that she does not get in trouble because she gives sexual favours to corrupt priests and other religious kinds, he finds women and Religion as deceitful and untrustworthy as each other. Donnes poem is addressing one woman but it seems that this woman is not one that he has met or encountered but rather a woman that represents everything that he believes to be special and important about women. Although the imagery set up by Donne by his words give the impression of a dramatic situation were he is actually talking to his beloved, it is possible to see her as a universal symbol of an idealised woman; Donne obviously feels that woman are an extremely important part of life and without them there would not be love and without that his life would not be complete. At one point he even compares his universal woman to god, by saying that god gives grace to certain people on earth and women give their grace (their heaven) which is their bodies to certain men: Whom their imputed grace will dignify must see revealed. He believes that women have the power of god because they can give their bodies to certain men and to a man a womans body is like heaven on earth. This figure represents Donnes ideal woman, he is worshipping a figure that believes to be more important than a lot of things in life. He sees her as an elevated subject to which respect must be laid, this concept is not so much heroic but has touches of classical poetry, it is not heroic because the language used is not elaborate enough and nor does in have connotations to other heroes. But the way in which he praises an elevated subject is like how classical poets praised gods. The way in which both address their subject is very important because Donne is direct we are encapsulated by her and we feel pulled in just as he is. By talking to her in direct speech it makes the scene more dramatic and exciting. But Swift talks about his subject in the third person, which keeps her at arms length just as we would if we met this woman. The verse that each poet uses is also important in their conveying of themes and ideas; Swift uses iambic tetrameter which was used in comic poetry because it makes the verse simple. He uses the Caesura in each line effectively as well, sometimes he has it early and others it is late depending on what he wants to emphasise in the line. Donne uses iambic pentameter which is a far more orthodox method of writing at that time.

Effect of Bone Marrow Composition Changes With Age

Effect of Bone Marrow Composition Changes With Age PROJECT TOPIC: INVESTIGATION INTO THE EFFECT OF BONE MARROW COMPOSITION CHANGES WITH AGE BETWEEN THE TWO GENDERS ON FINE STRUCTURE ANALYSIS (FINESA) TECHNIQUE A short 100 word lay-person summary– The project is about the investigation into the bone marrow composition changes with age between the two genders and its effect on the structure MRI technique fineSA. It utilizes MR to excite the rectangular prism shape volume in the human body to generate a signal that is processed to provide information about anatomical structure of interest. It will be conducted in a 12 weeks period commencing with literature review of relevant journals and conference papers relating the topic. It will be followed by the modelling of a bone marrow phantom aimed at adding a uniform composition structure that will control the outcome of the project. It will then be concluded with the analysis of the processed clinical data for both genders with different age range. Aim The main aim of this project is to identify a trend between different gender subjects with a varying range of ages from 18-80 and other measures of signal which can be attributed to bone marrow composition and its effect on the fineSA technique. FineSA is a technique that defines anatomical structures using MR data by acquiring data from rectangular prisms located in the anatomical region and region of interest. It is currently unknown what happens to the fineSA in regards to bone marrow (BM) changes. By identifying the trend it will enable the technique to be adjusted to suit each subject and not generalise its bone marrow applications as it is currently done. The research will fill a gap in the industry concerning the bone marrow composition (BMC) changes with ages with the use of the fineSA techniques. Objectives Carry out a detailed literature research related to BMC changes with age and sex. Relevant journals and conference papers will be analysed to support the research work. The modelling of a bone marrow phantom to observe the effect of fat will be accomplished. The fluid around the phantom will simulate the bone marrow and that will give the signal expected. Analysis and evaluation of a clinical data set for different gender ages ranging 18-80 will be carried out. It will be started by looking at the k0 on the spectra with respect to the age and the expected bone marrow composition. The data obtained from the company is made of spectra in Matlab format and the relevant information will be extracted in Matlab. It will also be necessary to investigate the effect of noise as noise is measured during the acquisition. Resources and necessary approvals I will need to complete Human Subjects Protection training in order to work with patient data. It is used to fulfil the requirement for education in the protection of human subjects. The ethical review board that approved this study is Western Institutional Review Board (WIRB) located in the USA. There are no known health risks associated with this research. Literature review According to the literatures, bone marrow does changes with age and becomes fatty and so it is expected to give a higher signal in the MR technique used. According to an early studies conducted, for daughters and their parents to compare (BMF) content assessed by inphase and out-of-phase MRI in between family members. It was found that the daughters had less BMF and BM whole body and regions where BMF was assessed than their mothers and fathers. This was in agreement with a previous studies that link increased BMF with age [1]. MR spectroscopy studies have demonstrate that vertebral fat content increases as the bone density (BD) decreases. Several literatures have suggested a relationship between bone mineral content and bone marrow fat (BMF) which has been found to lead to bone weakness. A study was conducted on fifty-six female patients with the age range 50–65 years to assess vertebral bone marrow fat (BMF) content’s relationship with osteoporosis by the use of chemical-shift magnetic resonance imaging (CS-MRI). It was however concluded that BMF content calculated with CS-MRI was not reliable for predicting bone mineral density in female patients aged between 50 and 65 years and so further research was recommended [2]. Differences in the relationship between BMF and bone has also been attributed to the potential ethnic differences in African American and Caucasian men and women. This was shown in a study done to evaluate the relationship between BMAT and BMD for potential sex and ethnic differences within a large sample with DXA and whole-body MRI data. The results obtained was found to be consistent with a previous findings done in Caucasian women and of Asian men and women. However there is reported inverse association between BMF and BMD in studies of men and women without ethnicity explicitly [3]. A further study conducted on 211 subjects also suggested that BMC changes are different for both male and female subjects. The largest change in the BMC in the lumbar spine was seen to have occurred from 5 to 24 years in the male subjects. Conversely, the largest decrease occurred after 45 years in female subjects. In an earlier research by Dunnill et al. [4] to investigate the changes in cellular and BMF in the vertebral bodies and correlate those changes with age and sex, no differences between the sexes for age-related variations was found. This also implied more research need to be done to ascertain the relationship between BMC and age and sex [5]. Methodologies The project will be managed with the aid of programme of work with details on a Gantt chart that list all the tasks dates. The milestones mark the completion of a task and meetings with the supervisor for review. Literature research (2 week) A review of relevant literatures in relation to BMC changes with age and gender. Outcome 1: Literature review finished and theories for further research have been studied. Phantom Modelling (2 week) Arrangement will be made with the company for this to be carried out Outcome 2: Pantom modelled and analysed. Data analysis and evaluation (3 week) The clinical data will be analysed will be carried out at this stage and then evaluated. Outcome 3: Data analysed and a conclusion drawn. Draft write up (2 week) Write the first draft of the dissertation which will be presented to the research supervisor for review. Outcome 4: Complete first drafted of the report. Final dissertation (2 week) The final copy will be produced and reviewed for any errors and ethical issues by supervisor and then submitted. Outcome 5: Complete the final report for submission. Contingency (1 week) This is an open period where any problems encountered will be dealt with. Conclusion The research plan was conducted to evaluate the purpose and methodologies that will be employed for the project to be successful. With the timelines drafted and the resources effectively utilised the project is expected to be successful. At the end of the project, the results should guide the industry in use of the fineSA with bone marrow composition changes with age application. If it is concluded that there is a trend in the bone marrow composition changes with age, it will require changes made to the technique used in acquiring the signals. This could lead to having to adjust for composition the current technique used.

Wind Powered Battery Charger Engineering Essay

Wind Powered Battery Charger Engineering Essay Renewable energy is a burning issue nowadays; different energy resources are being analyzed, tested and improved in order to replace non renewable energy resources. Wind is one of the renewable energy resources which is available in abundance, especially in Europe, huge amount of energy can be produced by using windmills and then this energy can be saved for later usage. This project looks at the brief history of windmills; their past usage, present usage and future. In addition to this, a prototype circuit is also build which utilizes wind energy to charge 4.5v battery when wind energy is less and 12v battery is charged when high energy is produced by the wind. In addition to this, future recommendations are also made to improve the circuit design. Acknowledgments First and foremost, I would like to express my sincere gratitude and appreciation to my supervisors, Mr. Nader Anani. He has been giving me his professional advice and guidance throughout the duration of this work. It was his support and confidence in me that led me to successfully complete this project. It has been a pleasure working under his supervision. I wish to dedicate this thesis to my family who I dearly love and respect. Table of Contents Introduction In the near future renewable energy resources like solar and wind energy will be replacing conventional non renewable energy resources. Non renewable energy resources are limited in their availability and are running out quickly due to their vast use in the modern society. [1] We rely on coal, oil and gas for running our industries; now that these resources are becoming scarce it is our responsibility to look for other forms of energy so that the future generations do not suffer due to this shortage. A lot of research is being carried out to select a reliable energy resource that can meet the energy demands of the future, which is reliable and efficient. Energy plays important role in various forms to let human being accomplish different tasks and makes human life easier and more comfortable, from the basic electrical energy that drives electrical and electronic machines and Internet to the kinetic and mechanical energy of vehicles, planes, and all other speedy sources of locomotion. The modern technological world has its own merits and demerits and challenges and issues which are accompanied with it as a result of scientific and industrial revolution and technological advancement. However with exponentially increasing use of devices and equipments requiring power and energy, these sources of energy saw the dreadful event of shortage and rareness. Hence scientists and researchers throughout the world started working on these burning issues and this gave birth to the field of renewable energy. This project is an attempt to develop a system which utilizes wind energy to efficiently charge up batteries that can be later used as a form of energy. Aim The aim of this project is to design, construct and test a battery charger fed from a wind energy source. Objectives Objectives of the current project are given below: Literature review and investigation of wind energy and its history Proposal of hardware design to build a wind powered battery charger Development of prototype circuit for charging batteries using Wind Energy Testing and analysis of the developed system Discussion on the results obtained Recommendations for the future work System Block Diagram Block diagram of the proposed system is given below: Figure : System Block Diagram As clearly illustrated in the system HLD, wind energy will rotate the wind turbines and by using generator within the wind turbines mechanical energy is converted to electrical energy, this electricity generated by the generator is unregulated and full of harmonics, in order to regulate this supply of electricity a regulator is required which in turn can be used to charge the battery. Report Structure This report will give an overview of the techniques and methods used to achieve the final product. 1) Introduction: This chapter discusses the aim, objectives, and explains the circuit block diagram. Figure : Breakdown of Report 2) Literature review: This section of report concentrates on the literature review regarding wind turbines and their use in modern day energy market. In addition to this technical information regarding components used for this project is also given. 3) Method: Method illustrates the detailed experimental procedures and different stages which are completed in order to attain the end product. 4) Results: The results obtained which are related to the performance of the finished product are given in results section. 5) Discussion and Conclusions: Further discussions on the results and the conclusions drawn after the completion of the project is presented in the fifth chapter. 6) Future work: This chapter presents possible ideas that can be implemented on the designed prototype, to achieve different kind of benefits. 7) References: References of information taken from internet. It also contains Bibliography section with details of the books and the texts, articles, magazines and the data sheets used. 8) Appendices: The appendix contains data sheets of the components use in this project. Literature Review Literature Review of this project is divided in following main sections: History and introduction of wind turbines Modeling of wind energy and generator History and Introduction of wind turbines In the beginning, a structure comprising of blades in the form of a fan was known as a windmill which was used to grind grain and pump water using wind energy. This windmill was later on developed to generate electricity and was renamed a wind turbine. [3] On the other hand a wind turbine is a machine which extracts energy from wind to generate electricity by the rotation of propeller like blades that drives a generator through shafts and gears present within it. It is a rotating machine which converts kinetic energy from wind into mechanical energy and this mechanical energy is converted into electricity using a generator. [4] File:Veladero 01.png Figure 3: Wind Turbine in Hilly Area [3] History: A wind turbine is a machine which extracts energy from wind to generate electricity by the rotation of propeller like blades that drives a generator through shafts and gears present within it (Britannica, 2011). It is a rotating machine which converts kinetic energy from wind into mechanical energy and this mechanical energy is converted into electricity using a generator. Since ancient times, man has harnessed the power of the wind to provide motive power for transportation. Likewise, the technique of grinding grain between stones to produce flour is similarly ancient, and widespread. Where and when these two came together in the first place is unknown, but a likely scenario suggests a Persian origin, from where the knowledge spread back into Northern Europe as a result of the Crusades. [4] Since the Persian mills were quite unlike the early European designs it seems just as likely that the adaptation of wind as a power source was independently discovered in Europe. Of course wind was not the first non-human power source applied to the task of grinding corn as it was preceded by both animal power, and in all probability by water power. European millwrights became highly skilled craftsmen, developing the technology tremendously and as Europeans set off colonizing the rest of the globe, windmills spread throughout the world. The basics of windmill design include those built by the British, who developed many advanced control mechanisms over the centuries, and the Dutch who used windmills extensively to pump water and for industrial uses, as well as to grind grain. [5] As steam power developed, the uncertain power of the wind became less and less economic, and we are left today with a tiny fraction of the elegant structures that once extracted power from the wind. These remaining windmills, seen all over the world, are a historic reminder of a past technological age. A number of mills have been restored either visually or in some cases back to full working order. However the promise of widespread power from the wind lives on both in the form of wind turbines producing electricity, and in the form of small scale wind pumps often largely low-tech installations still used extensively in the world of agriculture. [2] File:Wind turbine 1888 Charles Brush.jpg Figure 4: An old wind farm[4] Wind Power in Afghanistan: Wind power has been used for more than 2000 years and the first windmill used for mechanical purposes was built in Afghanistan in the 7th Century. This was a vertical axis windmill with rectangular shaped blades which was six to twelve sails covered in reed matting and was used to grind corn and drawing water. windmill39 Figure 5: Historical wind mill in Afghanistan [1] Wind Power in Britain: Evidence of windmills in England dates from the 12th century, with earlier references to mills generally held to be talking about either animal or water powered mills. The 14th and 15th centuries provide evidence of what the early mills looked like with illustrations in diverse media such as memorial brasses, stained glass, and wood carvings, as well as the expected manuscript records. These early illustrations all showed the simple all wooden post mill structure. The first illustration was shown in the late 1270 A.D which was a four bladed mill mounted on a central post. This was known as the post mill and was already a fair technologically advanced setup as compared to the Persian mills. These mills used wooden gears for the motion of the horizontal shaft to vertical movement to turn a grind stone. [4] Wind Power in Holland: As early as 1390 the Dutch set out to refine a design known as the tower mill. This was actually a standard post mill affixed to the top of a multi story tower with separate floors devoted to grinding  grain, removing chaff, storing grain and living quarters for the wind-smith and his family. Both the post mill as well as the tower mill designs had to be adjusted according to the wind manually. This was done by pushing a large lever at the back of the mill. Also optimizing the windmill energy and power output plus protecting the mill from damage by furling the rotor sails during storms was the main job of the wind-smith. [1] Improvement in the design of the Wind mill: A primary improvement in the design of the European mills was the use of sails that generated aerodynamic lift. This feature improved the rotor efficiency as compared to the Persian mills by allowing an increase in rotor speed and hence which resulted in superior grinding and pumping action.[5] The process of perfecting the windmill as well as making incremental improvements towards its efficiency took 500 years. By the time the process was completed the windmill sails had major features which were recognised by modern designers as being crucial to the performance of modern wind turbine blades. Some models also featured aerodynamic brakes, spoilers, and flaps. windmill Figure 6: Mid 20th Century Windmill [4] While continuing well into the 19th century the use of large tower mills declined with the increased use of steam engines. The next step in the development of wind power occurred many thousands of miles to the west. [1] Wind Power in the USA: For hundreds of years the most important application of windmills at the subsistence level has been mechanical water pumping. This was done using relatively small systems with rotor diameters of one to several meters. These systems were perfected in the United States during the19th century. It initiated with the introduction of Halladay windmill in 1854, and continuing to the Aermotor and Dempster designs. [4] The most significant modification of the American fan shaped windmill was the development of steel blades in 1870. These could be made lighter and worked into more efficient shapes. But, they worked so well that their high speed required a reduction in gear to turn the standard reciprocal pumps at the required speed. [1] In the late 19th century, advancement was made to the original design and a new type of wind mill known as the multi-blade windmill was manufactured. This design was used in the first large windmill in order to generate electricity. Wind Power in Denmark: Poul la Cour was the pioneer of electricity generating wind turbines and he published a journal based on wind power during the same year. Also it was reported that by 1918 around 120 local utilities in Denmark had a wind turbine. The approximated size was from 20 to 35 kW. At that time the wind turbines covered 3 percent of Danish electricity consumption and Danish interest in wind power increased at a high rate. [4] During the World War, the Danish engineers built a number of two as well as three bladed wind turbines although their concept is a three bladed machine. This type of turbines was used in areas usually based on a wind-diesel setup which ran the electricity supply system. The systems used designs focused on DC (direct current) generators to satisfy their needs but in 1951 these DC generators were replaced with AC (alternating current) generators and therefore became the second wind turbine to generate AC. [5] In 1980, Christian Riisager, built a small 22 kW wind turbine in his back yard using an earlier design known as the Gedser Wind Turbine (three bladed wind turbine). His turbine design became a success within households around Denmark and this success gave the present day Danish wind turbine designers an inspiration. [3] This inspiration led them to design all their wind turbines and this trend started from 1980 to the present day. A new generation of wind turbines was developed in 1981 and that became a technological breakthrough for modern wind turbines throughout the world. The serial manufacturing of wind turbines started and Danish manufacturers had much more of a track record than companies and their individual countries. Another thing to note is that California, which is one of the biggest wind farms in the world, has about half of the wind turbines of Danish origin. 20th Century Developments and Modern Wind Turbines: In the past, the Dutch refined the windmill and adapted it for draining lakes and marshes and when settlers took this technology to the New World in the late 19th century, they began using windmills to pump water for farms and ranches, and later, to generate electricity for homes and industry. [5]20th century was the time when windmills were actually recognised as Wind Turbines. Across the plains they were used to pump water as well as to generate electricity but at the same time as new methods of utilising wind energy were being introduced this trend gradually spread around the world. windmill Figure 7: Evolution of Windmill Design in 20th Century At present the modern wind turbines are based on three blades using AC generators and output is rated in mega watts (MW) or giga watts (GW). Some modern wind turbines are based on four to five blades and they are being used on both AC and DC. The governing body is the World Wind Energy Association and as per their annual World Energy Report, a total number of 76 countries in the world are using wind energy for commercial purposes. The main countries that widely use wind turbines at present include USA, UK, France, Germany, Australia, Denmark, Spain and China. The countries that recently became users of wind energy resources are India, Pakistan and Turkey. These figures suggest an increase in use of high output wind turbines but currently mini or small wind turbines are available and are being used where they have an output power requirement ranging from a few watts (W) to kilo watts (kW). [3] For a long time individual wind turbines were installed to support single households but now this idea has been advanced to improve the usage of this energy. Nowadays, wind turbines are installed on a large area may that be land or sea. The output is connected to a grid system. Many countries have installed a number of wind farms across their plains and suitable windy locations but the largest on-land wind farm is known as Roscoe Wind Farm and is located in Texas, USA. This wind farm comprises of 627 wind turbines and a total installed capacity of 781.5 MW and provides enough power for more than 250,000 average Texan homes. It is located about 200 miles west of Fort Worth, and covers nearly 100,000  acres. The second largest wind farm is also located in Texas, USA. This wind farm is known as the Horse Hallow Wind Energy Centre and has 421 wind turbines that generate a total capacity of 735 MW. Out of the total 421, 291 of them are 1.5 MW wind turbines and 130 are 2.3 MW wind turbin es. The turbines are owned by Florida Power Light and the company operates 46 other wind farms throughout the US. [4] 1-rosco-wind-farm Figure 8: Wind farm in England [5] The largest Off-shore wind farm in the world is the Thanet wind farm. It is located in the North Sea about 7 miles off the coast of Kent, England. The wind farm has 100 turbines and has the capability produce enough energy a year to power more than 200,000 homes. The second largest offshore wind farm is called Horns Rev 2 and is located on Horns Reef in a shallow area off the westernmost point of Denmark. Horns Rev 2 consist of 91, Siemens wind turbines with a total generating capacity of 209  MW. [7] Thanet-wind-farm-opened-006 Figure 9: Off shore wind farm along the coast of Kent (England) [5] Future of Wind Turbines: It is predicted that wind energy will be the most cost effective source of electrical power in the near future. A good part of this prediction has been proven during the current energy rush so its reliability can easily be visualised for future. Recent improvements in wind turbines have shown that the trends which have led to the dramatic fall in the cost of wind energy are set to continue. Countries all over the world are setting their targets for wind power and it is estimated that about 22,000 MW, in the form of 40,000 wind turbines will be installed in the next 10 years. Europe is the hub of this global business and will continue to be as around six companies supply over half of the worlds wind turbines. [6] As more and more countries start using this reliable source of electricity, master plans are being set for the future. Already the USA, China, Germany and UK have set targets to build further wind farms and each one bigger than the other. As USA has currently the biggest on-land wind farms in the world, they would like to maintain that in the future. Around six wind farms are planned within the USA for the next 15 years and they should be able to maintain the record of largest wind farms in the world. One of the planned wind farms is the Alta Wind Energy Centre in the Mojave Desert California. This farm will have more than 600 wind turbines and when it is completed this will have the capacity to generate 1,550 MW of energy which is double the capacity of the largest existing wind energy farm. USA has no off-shore wind farm but their future plans include the installation and usage of this setup. [6] 20100730-193513-pic-977799504 Figure 10: Wind farm in China [6] China also plans to increase their usage of wind energy and they are also involved in future projects as well as developing wind farms. One of their future aspirations is the under construction Gansu Wind Farm. It has been estimated that when completed by 2020 and would have the output capacity of 10 Giga watt (GW). They also plan to reach 100 GW overall wind energy output by 2020 as other future wind farms are under construction. By that time it could be the largest capacity wind farm in the world. In the UK, wind energy is being used extensively and more plans have been set in place for the future. They have more plans to build off-shore wind farms instead of on-land ones as well as to increase the capacity of current setup. Another master plan is to build a wind turbine factory, run by the German giant company Siemens and is expected to complete by 2015. Germany is also involved in certain future projects as their current setup is highly dependable on wind farms. Currently around 20,301 on-land wind turbines are located in the German federal areas and the country has plans to build more wind turbine farms and reach a high capacity by 2020.They are planning more offshore wind energy as well and predict a capacity of about 10.000 MW by 2020. Most of these off-shore farms will be erected up to 20-60 km away from the coastline. energy-frozen-fish-wind-farms-turbines_18081_600x450 Figure 11: Modern wind farm in Germany [2] Types of Wind Turbines: Since the development of the wind turbines, numerous designs have been introduced and used worldwide. The difference in these designs was on the basis of size, output power and shape of the wind turbine. The largest wind turbine and the one with the most individual output power up to date is the Enercon-126. Its rated output is about 7 MW and its rotor diameter is 126 meters. Wind turbines can be divided into two basic types and this is determined by the way the turbine spins. One is the horizontal axis wind turbine and is most commonly used (FIG- 12) while the other one is the vertical axis wind turbines (FIG-13). [3]http://www.ecotownforleicestershire.coop/assets/images/masterplanImages/energyreportVertical-axis-wind-turbine.jpghttp://www.aboutgenerator.com/wp-content/uploads/2010/07/how-to-build-a-wind-turbine.jpg FIG 12 [9] FIG 13 [9] Horizontal axis wind turbine (HAWT) is the common style wind turbine which has a design similar to that of a wind mill and has blades that look like a propeller that spin on the horizontal axis. The main rotor shaft and electrical generator are at the top of the tower and are pointed into the wind. Small turbines are pointed by a simple wind vane placed square with the rotor (blades), while large turbines generally use a wind sensor coupled with a servo motor. [9] Since a tower produces turbulence behind it hence the turbine is usually pointed upwind of the tower. Wind turbine blades are made stiff to prevent the blades from being pushed into the tower by high winds. Since the turbulence leads to fatigue failures so most HAWTs are upwind machines. Since the blades always move perpendicularly to the wind they help receive power through the whole rotation. [9] Small wind turbines are being used extensively in off-grid systems like street lighting, phone booths, lighting up parking areas and public mobile chargers. These wind turbines are usually used with another device such as solar panels and are part of a setup. They are light, easy to install and reliable in all wind conditions. Green-Column2 Figure 14: Green Column [1] Vertical axis wind turbine (VAWT) is when the main rotor shaft is arranged vertically.   The main advantage of this arrangement is that the wind turbine does not need to be pointed into the wind and can be most reliable on sites where the wind direction is highly variable or turbulent. In a VAWT the generator and other main components can be placed near the ground so the tower does not need to support it. It is difficult to mount these type of turbines on towers so they are often installed nearer to the base on which they rest, such as the ground or a building rooftop. The wind speed is slower at a lower altitude which means less wind energy is available so air flow near the ground and other objects can create turbulent flow resulting in issues like vibration. However, when a turbine is mounted on a rooftop, the building will generally redirect the wind over the roof and this doubles the wind speed at the turbine. [9] There are two subtypes of VAWT: Darrieus wind turbines are commonly called Eggbeater turbines as they look like an eggbeater. They are highly efficient but produce large ripple and cyclic stress on the tower which will contribute towards low reliability. They generally require some external power source to start turning because the starting torque is very low. The torque ripple is reduced by using three or more blades which will result in a higher solidity for the turbine rotor. Solidity is measured by blade area over the rotor area and newer models of this type of turbines are not held up by guy-wires but have an external superstructure connected to the top. Savonius wind turbines is a drag type turbine and are commonly used in cases of high reliability in things such as ventilation systems. Because they are a drag type turbine they are less efficient than a common HAWT but they are excellent in areas of turbulent wind and self starting. Wind turbine manufacturers: As wind energy has become a widely used concept, a number of companies have introduced their designs and perfected them. The most popular companies around today are Enercon (Germany), Vestas (Denmark), GE Wind Energy (USA), Siemens Wind Power (Germany), RE Power (Germany), Sinovel (China), Goldwind (China) and Gamesa (Spain). All these companies are famous for manufacturing as per their own HAWT designs and their systems are being used worldwide. Enercon, Germany based company, is the only company to have made the most powerful and largest wind turbine in the world known as Enercon-126. They continue to work on more ideas and increase the output capability of their wind turbine. On the other hand Vestas which is a Denmark based company is the biggest manufacturer of wind turbines in the world. Most of their wind turbines and installed in Europe as well as USA and their orders keep on increasing day by day as per demand and dependence on wind energy. It was stated that most of the designs from other companies are actually modifications to the original design created by Vestas and this influence can be seen in their systems. [10] Other companies like GE Wind Energy and Siemens have made major contributions in the manufacturing and enhancing the capabilities of wind turbines of the present age and they are looking forward to the future for more opportunities to make themselves well known within the industry. [10] Small sized wind turbines made their way into the industry due to the need for smaller and off-grid systems. Marlec Renewable Power is one of the companies that initiated this type of wind turbines and they came up with the idea named Rutland wind turbines. Rutland wind turbines are being commonly used in UK and Europe these days but further international use has been planned due to the interest shown by foreign investors. Rutland wind turbines have current designs using 3 to 6 blades but they are mini versions of HAWT and no VAWT designs have been introduced up to date. They have mostly been used in off-grid systems and add a good combination to the environment surrounded by wind turbines. [10] Disadvantages of wind turbines: The strength of the wind is not constant and it varies from zero to storm force. Which means that wind turbines will not generate the same amount of electricity all the time as well as there will be times when they generate no electricity at all. Many people feel that the countryside should be left untouched so the landscape could be left in its natural form. Wind turbines are noisy as each one can generate the same level of noise as a family car at very high speed. People see large wind turbines as unattractive structures and not pleasant to look at. They could disfigure the countryside and might seem a horrible sight. Wind turbine construction can be very expensive and costly to the surrounding wildlife during the building and installation process. In some areas of wind farm developments birds have been found dead around the base of turbines. Many people think wind turbines are a great idea, yet a large proportion of these people would oppose a wind farm development close to their home due to their land price reduction as well as noise pollution. Modeling of wind energy and generator In order to develop the prototype circuit in the laboratory, wind energy has to be simulated along with the generator. At first it was decided to use a 12 volt manual generator which can be operated by hand to output 12v so that this can be fed for the rest of the circuitry. A cheap 12v Generator could not be found, very expensive models were available but it was decided not to buy them as it will increase the cost of the product dramatically. Finally, it was agreed that the 12v DC from the power supply will be used to simulate the output of the wind generator. Method Method section of this report throws light on the wind power battery charger circuit used and also explains different techniques used in order to build the prototype. Method section of this report can be sub divided in the following main categories: 1: Research regarding components used in this project 2: Circuit Design and Explanation 3: Circuit Construction Research regarding components used in this project At first it was decided to develop a battery management circuit from scratch by using analogue circuitry, buck converter and 555 timer or microcontroller in order to switch the buck converter, but after some research and investigation it was found that there are some specialized ICs available which can be used for managing battery charging circuits. Different verities of battery management IC were available from Liner technologies, Analogue devices, microchip and National Instruments: but selection criteria for the IC involved: a DIP package for easy prototyping, operating temperature range of -40 to +85à ¢Ã¢â‚¬Å¾Ã†â€™, supply voltage rating of up to 18v and cheap in price. After some search through different vendor websites, LTC1042 seemed to be a suitable candidate for this particular application. After mutual consent it was decided to use LTC1042 as main charge management IC in this project. Circuit Design and Explanation Looking through the LTC1042 datasheet, it was discovered that this IC can be adopted for the needs of renewable energy resources and can easily manage different load types based on the amount of energy being produced at one particular time. Application notes of LTC1042 suggested a circuit for using this IC for managing wind powered battery charger. In order to prove the concept of the system, it is decided to build this circuit and experiment with it. Chosen Circuit: The circuit to be built is shown in the diagram below: Figure 15: Wind Powered Battery Charger Circuit Circuit Explanation This circuit behaves in a latching manner, i.e. depending upon the voltage being generated by the wind generator different type of load will be on and off. LTC1042 is a CMOS window and manages the turning on and turning off of different loads. This circuit contains two batteries and one load, its operation is summarized in the following lines: 1: If the generator output voltage is below 13.8v, charge regulator circuit is active and Ni-Cad battery will

What are the main reasons for Sony PlayStation’s profitability? Essay

What are the main reasons for Sony PlayStation’s profitability? In the year 1994, Sony launched its own video console called the PlayStation which is now one of the most well known and best selling gaming consoles in the whole world. The PlayStation has been even more successful since the product has been re-launched and innovated in 2000, called PlayStation 2. The secret behind the success of high profitability will be discussed in this coursework, primarily the main reasons have been Innovation, the Advertising Strategy applied and the rest of the marketing mix used by the Sony Corporation. One of the main reasons behind the PlayStation being a ‘winner’ for the Sony Corporation is Innovation. Innovation is the process of bringing a new idea to the marketplace. Sony’s PlayStation revealed the CD-ROM gaming technology for the first time in the market instead of the cartridge-based technology which was used by its respective competitors, Nintendo 64 and Sega Saturn. This mind-blowing technology helped to improve the graphics providing a 3D multimedia view along with the incorporation of a 1024K dual-parted VRAM which allowed the picture displayed on-screen to change quickly. These high quality graphics proved to add value to the product and thus many consumers decided to go for the PlayStation. To Sony’s delight, PlayStation sold more than 300,000 units in the first 30 days: a great achievement which boosted up the profitability of the company, leaving the competitors thoughtless. Another reason which has helped to increase PlayStation’s profitability is the advertising campaign approached by Sony. The PlayStation is usually advertised through magazines and TV adverts. This time it did not aim at the traditional 8-16 years old demographic target audience. Although, this time the product was aimed at an older audience so that higher consumer awareness could be achieved. The good thing about the PlayStation’s TV adverts is that it tries to differentiate the product from the competition whilst also generating interest and awareness of the new product launch. Also, Sony tries to sponsor certain big and famous events such as 1995 MTV Music Awards and the UEFA Champions League in order to increase more profitability. Furthermore, all this advertising has helped to create a positive image about the company. This strong and po... ...his has helped to satisfy the demand better which has increased Sony’s sales and therefore led to higher profitability. Apart from all these things, Sony’s PlayStation has had other innovative ideas which have increased profitability. The PlayStation 2 also has a DVD player incorporated with it. This means that now the consumers enjoy the added value of a DVD player and they do not need to have a separate one. Moreover, Sony was the first one to introduce more than four players gaming through the Multi Tap. This meant that now consumers could play with each other just using one console which helped to increase flexibility. Furthermore, it also introduced the Memory Card which allowed users to save their game data in it. Like this, the user could continue the game from last saved stage or could take it to a somewhere else and play there. What is more that, PlayStation’s remote control have more better design which make it easier to play and prove to be more comfortable. All these innovative ideas have helped to make the PlayStation much more appealing than the competitors’ products. The profitability has again been affected due to these factors by incrementing it.

Walker & Everyday Use Essay -- essays research papers

Many times an author draws from his or her personal life and incorporates his or her past into the short story. Alice Walker is one of the most respected, well-known African-American authors of her time. Alice Walker experienced a lifetime of hardship that would influence her later works, helping her to become such an astonishing author. In her short story "Everyday Use", Walker tells the story of her heritage and enables the reader to encounter the values in her life. On February 9, 1944 in Eatonton, Georgia, Willie Lee and Minnie Grant gave birth to their eighth child; a precious little girl whom they named Alice. As an extremely intelligent child Alice was always exploring the world around her. "She said that one of her favorite pastimes in the world was 'people watching.'" (http://members.tripod.com/chrisdanielle/alicebio_1.html). When Walker was eight years old, she and her brother were playing a game of cowboys and Indians outside when Alice's brother accidentally hit her in the eye with a BB pellet, blinding her in her right eye. Although that didn't stop Alice, she went on achieving excellent grades and going on to college. She first attended Spelman College (an African-American institution) on a handicap scholarship she'd been granted. Unhappy with the way Spelman's treated her for her involvement of activism and civil rights, she accepted a scholarship from Saint Lawrence College in New York. Alice was faced with great diff iculties such as abortion and suicide, but she pulled through and graduated in 1965 kicking off the begging of an unforgettable and ongoing career. (http://members.tripod.com/chrisdanielle/alicebio_1.html) By distinguishing the family-oriented round characters in the short story "Everyday Use", Alice Walker illustrates the common mistake of placing the association of heritage solely in material objects. Walker presents Mama and Maggie, the younger daughter, as an example that heritage in both knowledge and form passes from one generation to another through a learning and experience connection. However, by a broken connection, Dee, the older daughter, represents a misconception of heritage as materialistic. During Dee's visit to Mama and Maggie, the contrast of the characters becomes the conflict, because Dee... ... family values, Mama takes the quilts from Dee who "held the quilts securely in her arms, stroking them clutching them closely to her bosom" (Walker, 91) like sacred representation, and then gives them to their rightful owner: Maggie. After Mama gives Maggie the quilts, Dee says, "You just don't understand," "Your heritage" (Walker, 91). Dee believes heritage and family values to be materialistic things. Dee understands that the quilts were hand-made, but she lacks the knowledge and history behind these quilts. On the other hand Mama and Maggie understand the meaning of the quilts and know that they were made for everyday use. Ironically, Dee criticizes Mama for not understanding heritage when, in fact, Dee fails to really understand her own heritage. Dee mistakenly places heritage wholly in what she owns, not what she knows. Work-Cited Living By Grace. Danielle, Chris. 1999. Tripod. 03-10-2005. http://members.tripod.com/chrisdanielle/index.html Walker, Alice. "Everyday Use". Literature An Introduction to Reading and Writing Sixth Edition. Ed. Edgar V. Roberts and Henry E. Jacobs. New Jersey: Prentice-Hall, Inc., 2001, 360-365. Walker & Everyday Use Essay -- essays research papers Many times an author draws from his or her personal life and incorporates his or her past into the short story. Alice Walker is one of the most respected, well-known African-American authors of her time. Alice Walker experienced a lifetime of hardship that would influence her later works, helping her to become such an astonishing author. In her short story "Everyday Use", Walker tells the story of her heritage and enables the reader to encounter the values in her life. On February 9, 1944 in Eatonton, Georgia, Willie Lee and Minnie Grant gave birth to their eighth child; a precious little girl whom they named Alice. As an extremely intelligent child Alice was always exploring the world around her. "She said that one of her favorite pastimes in the world was 'people watching.'" (http://members.tripod.com/chrisdanielle/alicebio_1.html). When Walker was eight years old, she and her brother were playing a game of cowboys and Indians outside when Alice's brother accidentally hit her in the eye with a BB pellet, blinding her in her right eye. Although that didn't stop Alice, she went on achieving excellent grades and going on to college. She first attended Spelman College (an African-American institution) on a handicap scholarship she'd been granted. Unhappy with the way Spelman's treated her for her involvement of activism and civil rights, she accepted a scholarship from Saint Lawrence College in New York. Alice was faced with great diff iculties such as abortion and suicide, but she pulled through and graduated in 1965 kicking off the begging of an unforgettable and ongoing career. (http://members.tripod.com/chrisdanielle/alicebio_1.html) By distinguishing the family-oriented round characters in the short story "Everyday Use", Alice Walker illustrates the common mistake of placing the association of heritage solely in material objects. Walker presents Mama and Maggie, the younger daughter, as an example that heritage in both knowledge and form passes from one generation to another through a learning and experience connection. However, by a broken connection, Dee, the older daughter, represents a misconception of heritage as materialistic. During Dee's visit to Mama and Maggie, the contrast of the characters becomes the conflict, because Dee... ... family values, Mama takes the quilts from Dee who "held the quilts securely in her arms, stroking them clutching them closely to her bosom" (Walker, 91) like sacred representation, and then gives them to their rightful owner: Maggie. After Mama gives Maggie the quilts, Dee says, "You just don't understand," "Your heritage" (Walker, 91). Dee believes heritage and family values to be materialistic things. Dee understands that the quilts were hand-made, but she lacks the knowledge and history behind these quilts. On the other hand Mama and Maggie understand the meaning of the quilts and know that they were made for everyday use. Ironically, Dee criticizes Mama for not understanding heritage when, in fact, Dee fails to really understand her own heritage. Dee mistakenly places heritage wholly in what she owns, not what she knows. Work-Cited Living By Grace. Danielle, Chris. 1999. Tripod. 03-10-2005. http://members.tripod.com/chrisdanielle/index.html Walker, Alice. "Everyday Use". Literature An Introduction to Reading and Writing Sixth Edition. Ed. Edgar V. Roberts and Henry E. Jacobs. New Jersey: Prentice-Hall, Inc., 2001, 360-365.

Kari Charboneau Competency Statement Essay

To establish positive and productive relationships with families To establish positive and productive relationships with families I try to make sure I keep an open, honest relationship with them. I feel its important to have my parents feel that they can trust me. I also feel its important they know I have the best interest of their child in mind. Parents need to feel that they are being listened to and that we care enough to work with them in regards to their child’s wellbeing.†¦ CG 4.1 Keeping Families Informed In my center it’s a priority to make sure we are keeping all families informed of all the things that we as a center do as well as their individual child’s daily activities. I would have a welcome packet that includes contact information as well as center information. This would include information such as teacher profiles, center policies etc. I will make it a point to get to know each parent and to establish an open dialect. I would have information as to how they can contact me to discuss any concerns they may have as well as just general information we just share on a daily basis. We would have a monthly newsletter and calendar with center activities on it as well as weekly information in the entry way to remind them of any upcoming events we may have. There will also be daily communication sheets provided for each child describing what their child did throughout the day. Parents will know that they are welcome to stop in or call a t any time to check on their child’s day. CG 4.2 Teaching Practices I believe that by having open conversations with my families they start to trust and with that we have conversations about not only their child but also our own lives outside of the center. Knowing that maybe one parent might be out of town is good information to have. This helps us understand why a child may be having a change in behavior. I will make sure I know the children in my care well enough to notice changes and having a good parent relationship’s will allow me to communicate with them and find out if they notice the changes as well and to see if they have ideas as to why. If it’s not a typical reason we would expect to see a change in behavior from we can then work together to see if we can’t figure  it out and come up with a plan that will help meet that child’s individual needs. There will be a communication sheet written out daily that will highlight their child’s day and at pick up we can then discuss why their child may have had a more difficult day or even the opposite that their child was really happy. We may find out that they have family visiting that the child loves to be around or that Daddy has been out of town for a few days. These are both good reasons to see a change in a child’s normal behavior. Communication is very important in keeping good relationships going.

O How Human Resource Management Has Developed in the Past Few Years to Become an Integral Part of Our Organizations?

Essay Question: How Human Resource Management has developed in the past few years to become an integral part of our organizations? Major Field of Study: Human Resource Management. Human Resource Management has developed in the past few years to become an integral part of our organization. According to Armstrong, Michael (2006), â€Å"The terms â€Å"Human Resource Management† (HRM) and â€Å"human resources† (HR) have largely replaced the term â€Å"personnel management† (PM) as a description of the processes involved in managing people in organizations. In simple words PM means to describe activities that are necessary in the recruiting of a workforce, providing its members with payroll and benefits, and administrating their work-life needs. Torrington and hall (1987 p. 49) define PM as â€Å"a series of activities which: first enable working people and their employing organizations to agree about the objectives and nature of their working relationship and, secondly, ensures that the agreement is fulfilled† and Miller (1987 p. 52) suggests that HRM relates to â€Å"†¦Ã¢â‚¬ ¦. those decisions and actions which concern the management of employees at all levels in the business and which are related to the implementation of strategies directed towards creating and sustaining competitive advantage†. The early debate about HRM was conducted largely because of the absence of any data about actual practice. In recent years though much more information, both from large-scale surveys and from detailed case studies has becom e available. The growing body of research that seeks to examine the impact of HRM policies and practices on organizational outcome has come to a common solution saying that when individuals effectively implement these policies and practices, they provide significant economic benefit to the company. In order to learn the skills to practice good HRM in the workforce, it is integrated with many known courses of today’s date. Let’s take an example about one of the key functions of HRM, namely staffing. A person with a high level of understanding in HRM may be able to hire, recruit and train the best employees. Ensure they are high performers and deal with performance issues better, and most importantly is able to approach management in such a way that motivate an individual person to contribute to the achievement of the objectives of the business. Some other functions of HRM include learning about managing your approach to employee benefits and compensation, employee records and personnel policies. â€Å"_An organization is nothing without human resources. It is a lot of factories, expensive equipment and some impressive bank balances† (Low & Mourel, 1986). _The number of organizations around the world recognizing HRM as an integral part of their success is increasing every day. One of the main reasons for this is because when employers are hiring managers, one of the qualities they look for is if the employee has a high skill level in HRM. HRM is management, but management is more than HRM. Management normally includes marketing, budgetary control, production, operations control, finance and development. Because the purpose of HRM is to improve the productive contribution of people, it is intimately related to these aspects of management. All managers are involved in managing people and the management of an organization’s human resource. And because of this HRM is becoming an area which is regularly researched and developed further. Having done a course on HRM or even as a part of a course is becoming a necessary skill. Whether or not HRM is a profession has been questioned a lot (Jenks, July-Aug. ). What is not in question is that HR managers should be professional in terms of their qualifications and performance (Chruden and Sherman, 1984). The debate about HRM was conducted in the early days about the lack of research material on the subject is quickly turning into a thing of the past. More and more institutions are offering a course about HRM, and more and more people are learning from it. In order to be a good manager the HRM skills are required more in today’s date. Hardly a week goes by without the publication of another book on HRM. There are numerous handbooks, textbooks, encyclopedias, research and casebooks about HRM Businesses are getting globalised which means that as a manager of a department you may have communicate and manage people from lots of different cultures. Your duties may involve promotion, downsizing and performance reviews. You will have to do these with people from many different cultures, and to do these tasks you will require a higher understanding of HRM, which all in turn will lead to the organizations progress and profit. References Armstrong, Michael (2006). A Handbook of Human Resource Management Practice (10th ed. ) J. M. Jenks, ‘Let’s stop professionalizing’, Personnel Journal, vol 37, no. 3 July-Aug H. J. Chruden and J. W. Sherman, Managing Human Resources, 7th edition, 1984, p. 13 Peter S. Low, Mark P. Mourell, Stephen P. Robbins, Managing Human Resources, , 1986, p. 2, chapter 1 Bachelor Of International Hospitality Management (2009), Retrieved September 1, 2009, from http://www. aut. ac. nz/study-at-aut/study-areas/hospitality–tourism/qualifications/undergraduate-courses/bachelor-of-international-hospitality-management-human-resources